Best Epoxy Glue For Metal, Plastic, Glass

 

Top 10 the Best Epoxy Glue Products

I know that people hate it when they find there are some leaks or the chair legs that broken. It is too expensive to buy the new one, right? And if you want to try to make it, then you need an epoxy glue that will help you to put things together. The result will not make you disappointed. These following products give the best bonding effect.

Tips for Choosing Epoxy Products

Before we talk too far on choosing the products, there are some points you need to understand. After learning these guides, you can know how to choose the best one.

  1. Timing

When referring to timing, each product has different set and cure time. So, you need to determine the urgency of your bonding works. There are little work-life epoxies that only need 3-10 minutes to set up. There are also other medium work life epoxies with 20-40 minutes set time and the long one with more than an hour set time. However, the curing time might available in various range of time that can take up to 24 hours. So, you need to check on the pack carefully to meet your timing need.

  1. Materials

Here, you need to look at the materials you want to cure. Not all the products can work on certain materials. For example, not all the products are high enough to bond hard materials such as metal, steel or concrete.

  1. Strength

Each of the product can handle different tensile strength. In regards to strength, it determines the maximum load force needed to break the material bond created by the adhesive. The highest tensile strength is between 5,100 and 6,000 PSI that can hold steel and concrete materials well. For handling ceramics, glass, or plastics materials, 1,000 to 2,500 PSI strength will work fine.

  1. Temperature

Temperature range of products differs. Here, the temperature will determine how the adhesive bond can resist the heat or cold. The product is good even you use it at -51,1-degree Cup to 82-degree C. It means it can withstand the lowest temperature up to -60 degrees F and highest temperature up to 82-degrees C. Beyond the range will highly break the bond.

Top 10 Products

  1. Gorilla Epoxy

Let’s start with the lists; there is Gorilla Epoxy. As mentioned from the manufacturer, this epoxy glue has its catching motto, ‘For the toughest jobs on planet Earth.’ A good way to show how the glue can help you with any gluing job is by trying at your materials. Whether you work on wood, tile, ceramic, aluminum, and even steel can be bonded quickly with Gorilla’s gap-filling formula. Moreover, Gorilla’s formula also has water resistance and superior solvent features that applied incredibly robust and durable from household to automotive repairing jobs.

Furthermore, Gorilla brand is easy to use. The syringe helps to separate the resin and hardener so you can quickly dispense the filling. The easy-to-use syringe has the new cap to prevent the mixture to harden over time. Only after 5 minutes set applying the glue, it dries immediately in the perfect and crystal-clear finish. You might even don’t realize that there is something applied to the projects. The result is spotless. You can get one pack product contains with 25 ml.

Product Highlights:

  • Dries clear and faster
  • Water-resistant to moderate exposure
  • Solvent resistant
  • Easy to use set up to 5 minutes set for perfect fit
  • Solid and durable gap-filling ability

 

  1. J-B Weld 8277 WaterWeld Epoxy

Proudly made in the USA, J-B Weld claims to be the world’s strongest bonding glue. Do you have the problems with seal leaks, cracks, or patch holes? WaterWeld can be one of your problem-solving. Particularly, J-B Weld 8277 works better in water-or-fluids-related works, such as the tub, shower, pool, fuel tanks, boats, water tanks, and repairing plumbing. It works amazingly under water. After you set it in 15-25 minutes, the results will be hardened instantly in an hour. You can finish it with filed, drilled, tapped, sanded, or painted, and the cures give you a clean look. One pack of this putty stick contains with 57 gram.

Product highlights:

  • Good for all surfaces
  • Simple and easy-to-use
  • Water, oil, gas, diesel, hydraulic fluids, and most chemicals resistant
  • 900 PSI of tensile strength
  • Heating resistance up to 300 degrees F

 

  1. J-B Weld WaterWeld Epoxy Putty Stick

Still, from the same company, J-B Weld putty stick is another life-saver. Do you have a problem with plumbing leaks? Well, although it is not the way to solve the problem, applying WaterWeld can be the most cost-effective solutions for this issue or other similar circumstances. Only with this 2 oz. Putty Stick Epoxy, you can quickly cure the problem within 20-30 minutes. You can expect the results last for a few months or even longer. At least, J-B Weld gives you time to consider buying a new item and prevent spending a few dollars more.

Product highlights:

  • Water, gas, fluids, and most chemicals resistant
  • Will set for all surfaces
  • Tensile strength of 900 PSI
  • Up to 300 degrees F heat resistant

 

  1. Twin Pack J-B Weld 8281 Professional Size Steel Reinforced Epoxy

Do you need stronger bonding that works fine on steel surfaces? J-B Weld offers you with professional for steel reinforce ability. However, this steel reinforced also works on multiple surfaces from fiberglass, metal, brick, concrete, and much more. After 4-6 hours set to a dark grey color, you can get the strong and lasting cure in 15-24 hours. Available in the twin pack, you will get 10 oz. More stocks in your drawer.

Product highlights:

  • 3,960 PSI tensile strength
  • Up to 550 degrees F heat resistant
  • Permanent bond after set in 4-6 hours
  • Works on multiple surfaces

 

  1. DevconHome Epoxy

This is ideal for the fiberglass, porcelain and plastic repairing. You can also work fine on the tub, toilet, sinks, or other water-related items. If you find any cracks or holes, Devcon can help you to cure them back to the initial state. The best feature is the complete kit. You can get sticks, mixing tray, fiberglass patch, and even pigment for color matching to any surface looks. The glue will dry white, but you can match the finish to the surfaces’ color. For example, use almond or bisque pigment to match your porcelain looks. One pack Devcon contains with 30-gram filling.

Product highlights:

  • Water resistant
  • Fixes leaks and repairs holes
  • Pigment for color matching
  • 1,500 PSI tensile strength

 

  1. Devcon Home 2 Ton Epoxy

Do you need the strongest bonding from Devcon for curing and joining material together? Well, Devcon Home offers you with 2 Ton Epoxy that ideal for industrial works, such as with wood, metal, and concrete. Each bottle contains 125 ml. The blue bottle contains with resin, while the red one is hardener.  The chemical reaction between resin and hardener resulted in the high-quality bond that dries clear and withstands most fluids and chemicals. After you set the adhesive in 30 minutes, the bond can hold out up to 2,500 pounds per square inch.

Product highlights:

  • Waterproof
  • The result dries clear
  • 2,500 PSI tensile strength
  • Maybe tinted or with chalk or pigment for coloring

 

  1. Blue Magic Quiksteel

Another steel reinforced putty repair that worth to look after is Blue Magic Quiksteel. As written on the pack, you can see that this adhesive is great for metal repair. You can also use Blue Magic Quiksteel on various surfaces such as PVC, CPVC, plastic, ceramic, glass, fiberglass, brass, cast iron, vinyl, steel, and much more. Giving the setup time as fast as possible, Quiksteel only needs 5 minutes applying to finish curing in an hour. The setting up is better in underwater work with grey color cures. This putty promises to give stronger bonding that can hold up to 5,950 lbs. It also can withstand the heat up to 260 degrees Celcius (or 500 Fahrenheit) and the cold up to -68 degree Celcius (or -90 degree Fahrenheit).One pack Quiksteel contains 57 gram.

Product highlights:

  • Better set up under the water
  • Grey color cures
  • Tensile strength up to 5,950 PSI
  • 260 degree C/500 degree F heat resistant
  • -68 degree C/-90 degree F cold resistant
  • Established in 5 minutes and cures in 1 hour
  • Work on most surfaces

 

  1. Loctite Epoxy

Are you looking for great plastic bonder? Here, Loctite Epoxy adhesive can be one of your best solutions. You can bond your broken plastic chair together in 20 minutes set time. Not only plastic materials, but you can also bond other substrates such as polycarbonate, PVC, acrylic, FRP, ABS, nylon, phenolic, aluminum, and stainless steel. You can use this 0.85-fluid ounce glue for larger household repair. Loctite is resistant to water and offers high impact resistance which won’t crack when you drilled them. The product is easy to use due to its convenient syringe help to dispense equal amounts in every applying time.

Product highlights:

  • Tensile strength up to 3,450 PSI
  • Water resistant
  • Works on most plastic surfaces
  • Setting time in 20 minutes
  • High impact resistance

 

  1. Devcon 31345 2 Ton Clear Epoxy

Devcon offers another great option for the products for curing in the various application including fiberglass, ceramic, glass, acrylic, wood, metal, and concrete. Like other Devcon products, you can mix it with coloring pigment to get a new color. It is not only water resistant, but 2-ton from Devcon also resulted in robust and powerful bond to any application. Still, it is formulated with high clarity and good impact resistance. You can handle the formula in 30 minutes, set for other 30 minutes then wait for the best result in 8-12 hours.

Product highlights:

  • It takes max. 12 hours to cure
  • Non-shrinking adhesive
  • Bright and vigorous bond results
  • 2,500 PSI strength
  • Could be tinted with coloring pigment

 

  1. A+B Epoxy Putty

The last product on our list is 14 fluid ounces A+B Epoxy Putty. Whether you at home or in the middle of work, you can use this adhesive to cure all the works. So, you don’t need to do draining to fix plumbing leaks or holes in the pool. You can get the permanent and durable bond to cure from plastics, ceramics, metals, to concrete. The glue is easy to use because it contains with two-part putty. You just need to mix and mold them like clay into any shape with 1:1 mix ratio. After applying to the materials, it will harden in an hour and can steel-hard cure after 12 hours.

Product highlights:

  • It has great high & low temperature ratings
  • Set time in 50-60 minutes
  • Dry within 12 hours
  • Water resistant
  • Easy-to-use product

Final Verdict

Before choosing the best product, ensure to ask yourself what kind of product you need. After all, all those products on the list are an excellent choice for handle any underwater bonding works. You just need to look what kind of materials or surfaces you need to cure. If you need to handle stronger bonding work such as with steel or concrete, then the recommended products include Blue Magic Quiksteel, and J-B Weld Steel reinforced will work the best. However, if you are only looking for something to hold your broker plastic chairs or ceramic glass, then Loctite, J-B Weld, or Devcon will do the work just fine.

Please take a note that most adhesive product is highly sensitive to skin and eye. Always use reusable gloves during the setup to protect your hands and other body parts. Without gloves, it can cause skin irritation, allergic, and also flammable. So, you need to hand it carefully. After using the epoxy glue, do immediately clean all tools and your hands with soap and warm water.

 

This entry was posted in Glue on by .

Leave a Reply

Your email address will not be published. Required fields are marked *